What’s In The Box?

What’s Included In Your Shipment

The Submerge Chiller Pumps, Filters and Chills the Water in your Ice Bath.

Chiller Accessories

PROTECTIVE DRAIN CAPS Covering the Chiller OUTLET and INLET, protection for transportation and maintenance.

 

WATER HOSES These 2 flexible hoses facilitate the exchange of water between the Submerge Chiller and Tub. Each hose is 8 feet / 2.5 meters long.

HOSE O-RINGS These rubber rings are vital for water and airtight connections in the Water Hoses. 8 replacements rings are included with every purchase.

External Water Strainer Components

INNER WATER STRAINER The cylindrical mesh element that attaches to the CHILLER INLET.

WATER STRAINER COVER The metal cover that screws on the CHILLER INLET over the Inner Water Strainer.

STRAINER O-RINGS These are 2 replacement rings for the o-ring that sits at the base of the Water Strainer Cover.

WATER FILTER HOUSING The assembly which houses the Water Filter. Includes the Upper Water Filter Housing and the removable Water Filter Housing.

WATER FILTER The water filter is used to collect debris from the water running through the chiller. This is placed into the Lower Water Filter Housing.

 

FILTER HOUSING WRENCH Designed for when the Lower Water Filter Housing is too tight to loosen by hand. Do not use the wrench to tighten the filter housing when setting up or changing the filter. Only to loosen if too tight.

 

 

The Submerge Tub Portable, Inflatable Tub you Ice Bath in

Tub Accessories

DOUBLE ACTION AIR PUMP The air pump to inflate and deflate the Submerge Tub.

INFLATION VALVE The port used to inflate the Submerge Tub with the Double Action Air Pump. Includes the Inflation Valve Cap, and Inflation Valve Pin.

INFLATION VALVE PIN The spring loaded component of the Inflation Valve that is exposed when the Inflation Valve Cap is removed.

WATER VALVE FITTINGS The connection elbow/valve that connects the Tub Fittings to the Chiller Hoses running from the chiller. The parts of the Water Valve Fitting are the Threaded Collar, Elbow, and Valve.

TUB COVER The lockable cover for your Submerge Tub.

 

LOCKING BUCKLES The locking buckles on the Tub cover that fasten and lock the cover to the tub when not in use.

Accessories For Maintenance, Storage and Repair

BACKPACK Your storage and transportation carry-all for the Submerge Tub and your many ice bath accessories.

SKIMMER NET A large water skimming net that can efficiently filter your entire Tub in just a minute keeping it extra clean for every day use.

PATCH KIT Tub material in both branded colors in case you have an accident, most accidents are easily self repaired.

AIR VALVE WRENCH For adjusting the air valve pin to inflate and deflate the Submerge Tub.